OEM AD-121A2B Adapter DT-12V230 12V 1.2A Shimpo Stroboscoop

OEM CO.LTD registered trademark China AD-121A2B AC DC Batttery Charger DT-12V230 Adapter voeding Lader 12V-volt 1.2A Ampère (1200mA) 14.4W-Watt DT-12V120 for Shimpo Stroboscope Tachometer (SHIMPO DT-12V230 AC Adapter/Charger for DT-725 Stroboscope, 230 VAC

For Shimpo Instruments Check-Line Electromatic DT-725 DT-721 Rechargeable Battery Powered Digital Stroboscope Stroboscoop voor Industriële Toepassingen (onder voorbehoud)

-Prijs 18,95 + 4,95 verzendbijdrage (vanaf) DHL parcel track & trace afhaalpunt DHL of optioneel DHL thuisbezorging)

-Let op: Alleen voeding, een systeem specifieke voeding / system specific not universal with a small female Plug / tip

-Let op de plug is zeer small diameters intern 1.0mm x external 4.0mm millimeters / 8.0mm in lengte

-Originele Kwalitatieve Draadgewonden transformator / Lineaire ongereguleerde AC- DC adapter / voeding die geschikt is voor maar een enkele netspanning 220V 230V

-Voorzien van minimaal 12V-volt 1200mA milliampere 14.4-Watt vermogen

-LPS (Low Power Supply) for ITS / ICT / ITE apparatuur

-Voorzien van eigen AC wall-plug C7 EU / Europlug

-DC draad voorzien van gescheiden stroomdraden met een DC ronde female plug

-Voorzien van Fuse/ weerstanden tot 130 graden celcius

-Voorzien van ventilatieopeningen voor luchtstroom warmteafvoer

-Stoot/ Impact -behuizing van Noryl kunststof

-3 maanden niet goed geld terug garantie


Specificaties


-Model: partnumber AD121A2B

-Input Voltage: AC 2-pin EU (Europlug) C5 EN50075 220~230V (140mA) 50HZ

-Output Voltage DC 12V-volt 1.2A (Ampère) 1200mA (milliampere)

-Totaal vermogen 14.4W-Watt / 20VA

-Leakage / Rendement verliezen: minder dan / Less than 0.25mA (milliampere)

-Systeem specifieke (Sytem Specific) DC plug Rond Female plug

-DC TIP / Plug interne diameter 1.0mm (millimeters)

-DC TIP / Plug externe diameter 4.0mm

-Lengte / Length plug 8mm

-Lengte DC draad 100cm

-Oorpronkelijke Toepassing Professioneel industrials LPS (Low Power Supply)

-Type Lineaire Adapter regulated / gereguleerd

-Dielectrric 4500Vac/1sec @ 5mA

-Voldoet aan Veiligheidseisen Impacted resistance enclosure

-Beveiliging Thermal Fused smelt bij 130-graden celcius

-Opslag bij -20 graden ~ max 70 graden Celcius

-Bij Relatieve Luchtvochtigheid / Relatieve / Relatieve Humidity: 30% ~ 85%

-Gewenste Werking bij Ambient / Huiskamertempratuur max 25graden Celcius

-Gescheiden DC draden + en -

-Uitvoering Wall-plug AC DC adapter

-Exterieur / behuizing (Noryl) van deze trafo/ AC DC adapter is van Warmte ventilatieroosters / openingen voor luchtcirculatie voorzien

-Serviceable AC DC adapter transformator kan door gekwalificeerd personeel doormiddel van de schroeven worden geopend voor reparatie of onderhoud.

-Keurmerken / certificaten op de behuizing zijn de volgende keurmerken afgebeeld:

-CE keurmerk certificaat Conformité Européenne in overeenstemming gemaakt en voor gebruik conform de Europese Wet en regelgeving.

-ITS Intertek GS Sicherheit Geprüft Keurmerk TüV Rheinland

-lengte L 78mm x Breedte 53mm x dikte 48mm

-MTBF (Mean Time between Failures) t.a.v Levensduur 100.000 Hours / uur

-Gewicht 532gram 0.5KG



Replacement partnumbers / onderdeelnummers

OEM AD121A2B 12V 1.2a AC ADAPTER for Shimpo Instruments Stroboscoop DT-725

OEM AD-121A2

DT-12V230

DT-12V120 US 120V

DT-725UNPS


Shimpo Handheld Stroboscopes Instruments DT-725 Checkline Electromatic

Shimpo DT-725KIT Internal, NO.B15D066, Battery Powered Digital Stroboscope Stroboscoop Voor Industriële Toepassingen

The Shimpo DT-725-230V battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes and a continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a 40.0 to 12,500 flashes per minute (FPM) range and an accuracy of + or - 0.02% of reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The 5-digit, 8mm tall LED display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread and continuous duty cycle provide permanent installation and long-term use without the need for cool-down periods. The high-impact plastic housing provides durability. The stroboscope includes a 230V AC adapter and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.

Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. This enables the operator to evaluate machine performance without stopping the machine. Stroboscopes use either xenon flash tubes or LED light sources. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Multiply-by-2 (2/4 or 2X) and divide-by-2 (1/2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes.

Shimpo Instruments manufactures force, torque, and speed evaluation instruments. The company, founded in 1974 and headquartered in Itasca, IL, meets International Organization for Standardization (ISO) standard 9001.

Shimpo / NIDEC / Electromatic