7.5V, 2.4A Step-Down Voltage Regulator D24V22F7 Pololu 2860

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7 × 0.7 yet delivers a typical continuous output current of up to 2.4 A and features reverse voltage protection. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors. An optional shutdown pin enables a low-power state with a current draw of around 30 A to 350 A, depending on the input voltage, and a power-good output indicates when the regulator cannot adequately maintain the output voltage.

Features

• Input voltage:
  • 4 V to 36 V for the version that outputs 3.3 V
  • [output voltage + dropout voltage] to 36 V for output voltages of 5 V and higher (see below for more information on dropout voltage)
• Fixed 3.3 V, 5 V, 6 V, 7.5 V, 9 V, or 12 V output (depending on regulator version) with 4% accuracy
• Typical maximum continuous output current: >2 A
• Typical efficiency of 85% to 95%, depending on input voltage, output voltage, and load
• Switching frequency: ~400 kHz
• Integrated reverse-voltage protection, over-current protection, over-temperature shutoff, and soft-start
• 1 mA typical no-load quiescent current; this can be reduced to approximately 5 µA to 10 µA per volt on VIN by disabling the board
• “Power good” output indicates when the regulator cannot adequately maintain the output voltage
• Compact size: 0.7 × 0.7 × 0.31 (17.8 mm × 17.8 mm × 8 mm)
• Two 0.086 mounting holes for #2 or M2 screws

• Voor meer info klik hier Hier

Snelle levering meerdere op voorraad.

U kunt betalen via Paypal, Ideal en overschrijving

Kijk bij onze andere advertenties.

Of in de webshop voor onze complete assortiment



Verzending
De verzending wordt gedaan met PostNL voor een laag bedrag. Daarnaast kan je het natuurlijk ook af komen halen op het adres van VanAlleEnMeer.nl.



klik nu op onderstaande link voor meer voordeel

Kijk voor het gehele assortiment Adruino, 3D-printer onderdelen en led lampen op . www.vanallesenmeer.nl