Kenmerken
Conditie
Zo goed als nieuw
Type
Equalizer
Beschrijving
In nette staqt, ivm uitdunnen studio aparatuur te koop. XTA professionele Equalizer.
The XTA GQ600 is a professional, high-performance dual-channel 1/3-octave graphic equalizer designed for precision audio tailoring in live sound reinforcement and studio environments. Known for its pristine audio clarity, low noise floor, and rugged build quality, it provides critical room and system voicing capabilities.
Audio Performance
Frequency Response: +/- 0.5dB from 20Hz to 20kHz with sliders set flat.
Equivalent Input Noise: -100dBm 20Hz to 20kHz unweighted with controls flat.
Distortion (THD + Noise): < 0.01% @ +18dBm 1kHz.
Channel Separation: > 80dB at 1kHz
Peak Indicator Threshold: +20dBu
Inputs & Outputs
Input Architecture: Two channels, electronically balanced (optional factory transformer balancing available).
Input Impedance: >10kOhm
Common Mode Rejection Ratio (CMRR):> 65dB from 50Hz to 10kHz.
Output Architecture: Two channels, electronically balanced (optional factory transformer balancing available).
Source Impedance: < 60Ohm.
Minimum Load: 600 Ohm
Maximum Output Level: 23dBm into a 600Ohm load.
Master Channel Gain: 10dB via front-panel rotary control with a center detent.
Rear Connectors: 3-pin XLR (female inputs, male outputs) and 6-pin Klippon "quick-wire" connectors.
Filter & Equalizer Sections
Graphic Filters: 2 times 30 bands, spaced at true 1/3-octave intervals from 25Hz to 20kHz.
Filter Circuitry: High-performance, simulated LCR networks.
Frequency Tolerance: 3% of true center frequencies.
Slider Travel & Range: 45mm long-throw sliders providing 10dB boost/cut.
H.F. Trim Filter: 2nd-order, optimum phase, shelving filter; variable from 2kHz to 20kHz 8dB gain.
High-Pass Filter: 12dB/octave slope, sweepable from 10Hz to 150Hz -3dB point.
Low-Pass Filter: 18dB/octave slope, fixed at 27KHz-3dB bypassable via internal PCB jumper link
Physical & Power
Power Requirement: 110/120V 15% at 50/60Hz via standard 3-pin IEC connector.
Power Consumption: < 20W
Dimensions: 19" wide x 5.25" high (3U) x 9.3" deep (482mm x 133mm x 237mm.
Weight:5.0kg net (11.02lbs) - 6.7kg (14,77lbs) shipping
ophalen of verzending. geen marktplaats betaalverzoek en verzending via Marktplaats betaalverzoek. alleen verzending per post nl of dhl pakket, kosten 10euro en na betaling per bank
The XTA GQ600 is a professional, high-performance dual-channel 1/3-octave graphic equalizer designed for precision audio tailoring in live sound reinforcement and studio environments. Known for its pristine audio clarity, low noise floor, and rugged build quality, it provides critical room and system voicing capabilities.
Audio Performance
Frequency Response: +/- 0.5dB from 20Hz to 20kHz with sliders set flat.
Equivalent Input Noise: -100dBm 20Hz to 20kHz unweighted with controls flat.
Distortion (THD + Noise): < 0.01% @ +18dBm 1kHz.
Channel Separation: > 80dB at 1kHz
Peak Indicator Threshold: +20dBu
Inputs & Outputs
Input Architecture: Two channels, electronically balanced (optional factory transformer balancing available).
Input Impedance: >10kOhm
Common Mode Rejection Ratio (CMRR):> 65dB from 50Hz to 10kHz.
Output Architecture: Two channels, electronically balanced (optional factory transformer balancing available).
Source Impedance: < 60Ohm.
Minimum Load: 600 Ohm
Maximum Output Level: 23dBm into a 600Ohm load.
Master Channel Gain: 10dB via front-panel rotary control with a center detent.
Rear Connectors: 3-pin XLR (female inputs, male outputs) and 6-pin Klippon "quick-wire" connectors.
Filter & Equalizer Sections
Graphic Filters: 2 times 30 bands, spaced at true 1/3-octave intervals from 25Hz to 20kHz.
Filter Circuitry: High-performance, simulated LCR networks.
Frequency Tolerance: 3% of true center frequencies.
Slider Travel & Range: 45mm long-throw sliders providing 10dB boost/cut.
H.F. Trim Filter: 2nd-order, optimum phase, shelving filter; variable from 2kHz to 20kHz 8dB gain.
High-Pass Filter: 12dB/octave slope, sweepable from 10Hz to 150Hz -3dB point.
Low-Pass Filter: 18dB/octave slope, fixed at 27KHz-3dB bypassable via internal PCB jumper link
Physical & Power
Power Requirement: 110/120V 15% at 50/60Hz via standard 3-pin IEC connector.
Power Consumption: < 20W
Dimensions: 19" wide x 5.25" high (3U) x 9.3" deep (482mm x 133mm x 237mm.
Weight:5.0kg net (11.02lbs) - 6.7kg (14,77lbs) shipping
ophalen of verzending. geen marktplaats betaalverzoek en verzending via Marktplaats betaalverzoek. alleen verzending per post nl of dhl pakket, kosten 10euro en na betaling per bank
...
...
...
...
...
...
...
...
...
...
...
...
Uithoorn
39x bekeken
2x bewaard
Sinds 10 nov. '26
Advertentienummer: m2464105974
Populaire zoektermen
yamaha equalizeryamaha equalizerequalizer 19 inchboss me 30boss gt proparametrische equalizerart pro vlamini equalizerzoom gitaar effectentc electronicsline 6 pod hd pro xequalizer pedaalbuizen equalizereffecten echotelefoon reparatie vlaardingenetos slippersligplaats haarlem in Ligplaatsentoyota velgen 18 inch in Banden en Velgenspaarpot bank in Spaarpotten40x40 in Tegelste huur warmond in Huizen te huurmondstuk tenor saxofoon in Blaasinstrumenten | Saxofoonsbetonlook bijzettafelbunk beds in caravans-en-kamperen