Model NumberPT-DX100BrandPanasonicPower Consumption1,030 W (1,060 VA) (0.3 W when STANDBY MODE set to ECO*1,3 W when STANDBY MODE set to NORMAL)ColorBlackResolution1,024 x 768 pixelsKeystone Correction RangeVertical +-40 Degree *9Power Supply120-240 V AC, 10-5.2 A, 50/60 HzVertical Optical Axis Shift+50 % from center of screen (powered)*4Horizontal Optical Axis Shift+-10 % from center of screen (powered)Dissipation Btu3,516 BTU/hour (without light PT-DZ870/DW830: 3,400 BTU/hour, PT-DX100: 3,379 BTU/hour)DLP Chip Panel Size17.8 mm (0.7 in) diagonal (4:3 aspect ratio)Three D Sync one In TerminalsBNC x 1 (3D timing signal)DLP Chip Display MethodDLP chip x 1, DLP projection systemVideo In TerminalsBNC x 1 (composite video)Serial In TerminalsD-sub 9-pin (female) x 1 for external control (RS-232C compliant)Serial Out TerminalsD-sub 9-pin (male) x 1 for link controlRemote One In TerminalsM3 x 1 for wired remote controlRemote One Out TerminalsM3 x 1 for link control (for wired remote control)Remote Two In TerminalsD-sub 9-pin (female) x 1 for external control (parallel)LAN TerminalsRJ-45 x 1 (for network and DIGITAL LINK (video/network/serial control) connectionRGB Scanning FrequencyfH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lowerDimensions W x H x D498 x 200*13 x 556 mm (19-19/32 x 7-7/8*13 x 21-7/8 in) (with supplied lens)WeightApproximately 18.3 kg (40.3 lbs) (with supplied lens)Operation Noise40 dB (dual lamp operation, lamp mode: NORMAL), 35 dB (dual lamp operation, lamp mode: ECO)DLP Chip Pixels786,432 (1,024 x 768) pixelsOperating EnvironmentOperating temperature: 0-45 Degree C (32-113 DegF)*10, operating humidity: 10-80 % (no condensation)Applicable SoftwareLogo Transfer Software, Multi Projector Monitoring & Control SoftwareCabinet MaterialsMolded plasticLensPowered zoom (throw ratio 1.8-2.5:1), powered focus F 1.7-1.9, f 25.6-35.7 mmLamp420 W UHM lamp x 2Screen Size Diagonal1.27-15.24 m (50-600 in), 1.27-5.08 m (50-200 in) with the ET-DLE055, 2.54-8.89 m (100-350 in)Video Scanning FrequencyfH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]Brightness10,000 lm (dual-lamp, LAMP MODE: NORMAL)Center To Corner Uniformity90 %HDMI Scanning FrequencyfH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHzInstallationCeiling/floor, front/rearHDMI In TerminalsHDMI 19-pin x 1 (Deep Color, compatible with HDCP)SDI In TerminalsBNC x 1 (3G/HD/SD-SDI)DVI D In TerminalsDVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)RGB One In TerminalsBNC x 5 (RGB/YPBPR/YCBCR/YC x 1)RGB Two In TerminalsD-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)AvailabilityIn StockA unique dual-lamp drive system has helped to make the body compact, while two newly developed, high-output, 420 W lamps provide high brightness of 10,000 lm for the PT-DX100 and 8,500 lm for the PT-DZ870/DW830.

Features:

• Bright 10,000/8,500 lm from Compact Body
• Dynamic Iris for a High 10,000:1* Contrast Ratio
• The New Dynamic RGB Booster Enhances Both Brightness and Color Reproduction
• Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details
• System Daylight View 2 for Enhanced Color Perception
• DICOM Simulation Mode*
• Rec. 709 Mode for HDTV Projection
• Waveform Monitor Function
• Full-HD Ready WUXGA Resolution
• Advanced Technologies for Excellent Image Quality
• 3D color management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control
• 2:2 pulldown mode
• sRGB compatibility
• Panasonic's Original Dual Lamp System
• Long Lamp Life Contributes to Low TCO
• Filter-Less Dust-Resistant Optical Engine
• Easy Lamp Replacement*
• DIGITAL LINK Transmits Digital Signals up to 100 m (328 ft) with a Single Cable
• DIGITAL LINK technology allows easy integration into an existing control system.
• Art-Net* Compatible
• Multi-Screen Support System Seamlessly Connects Multiple Screens
• Multi-Unit Brightness Control
• Geometric Adjustment for Specially Shaped Screens (PT-DZ870)Optional Upgrade Kit (ET-UK20) Featuring Geometry Manager Pro (PT-DZ870)
• Active 3D Projection Capability
• Flexible Installation
• Portrait Mode Capability (optional)*
• Multiple Terminals with HD-SDI Compatibility
• Easy Remote Monitoring and Control over a LAN
• A Wide Selection of Optional Lenses
• P-in-P function*
• Mechanical lens shutter with fade in/out effect
• Scheduling function
• Direct power off
• 30 m long-range wireless remote control
• Anti-theft features with chain opening
• Control device setup function
• ID assignment for up to 64 units
• Built-in test pattern