Originele Mini Cooper Boost radio-CD (RDS) type CD53 R50

Autoradio CD speler type CD53 R50 - OEM P/NO 6 917 521 
Geproduceerd door Alpine. 


Geschikt voor de volgende modellen: 
Mini R50, R53 (1.Gen) One, One, Cooper Bj, 2001-2006
Mini R52 (1.Gen) Convertible, One, Cooper S Bj. 2004-10/2008
John-Cooper-Works (JCW), 1.4d, 1.4i, 1.6i


Technische gegevens:
Ondersteunt het multifunctionele stuurwiel
CD speler ondersteunt CD-RW
Aansluiting voor CD-Changer (CDC) en telefoon
6 geheugenplaatsen voor elk golfgebied
AM/FM RDS Radio
Uitgangsvermogen: 4 x 20 watt
Snelkoppeling van volumeregeling (MINI)
Verbinding met de Quadlock-stekker



CD53 Business CD Headset

The CD53 Business CD Headset has been designed to blend in with the vehicle interior and provide easy to read information via the display along with controls that are easy to reach and use. The radios support the following features:

 Connection to an aerial diversity system
 Speed dependent volume control (GAL)
 Diagnosis capability via DISplus
 Keyless operation for 20 minutes
 Control via multi-function steering wheel (if equipped)
 Automatic muting during a telephone call (if equipped)


Radio Functions

The radios are switched on or off by pressing the volume button on the radio. On all business spec sets the radio is operational in ignition position 1 and 2 and functions for 20 minutes after the key has been turned to position 0 or removed.

Automatic Tuning

When one of the seek tuning buttons, < or > is pressed, automatic tuning commences in the direction of the arrow on the button pressed. If no station has been found after the entire frequency band has been run through twice, the tuner stops the seek function and returns to the last set frequency. The seek function can be cancelled. by pressing the frequency band button, preset buttons, tone or - - button; this will then activate the function of the particular button pressed.

Manual Tuning

When the "m" button is pressed, manual control of the frequency search is obtained. Stepping up or down through the frequency range is performed by pressing the appropriate < or > which will adjust the frequency in a pre-determined step. Keeping the button depressed will allow the waveband to be scanned rapidly, releasing the button will then revert the operation back to the pre-determined step mode. After approx. 8 seconds the tuner will switch back to automatic tuning mode if neither of the seek tuning buttons is pressed. Manual tuning is available in all wavebands.

Scan
When the "m" button is pressed for approx 1.5 seconds the Scan facility is activated. The tuner will scan the respective waveband for all available stations and play each station for approx 7 seconds. When the tuner is set to the FM waveband and the RDS function is on, only RDS stations will be tuned in. To cancel the scan operation press the "m" button and this will revert the tuner to the last tuned station.

Tone
The tone button enables the following scroll sequence to be activated: Bass-Treble-Fader Balance-DSP functions (if equipped). Adjustment of each option is via the volume control knob. To revert the tone settings to the original mid point settings the tone button should be held for approximately 2 seconds. The setting may then be reset or the tone functions are exited via the - button. When the DSP amplifier is installed the final options in the tone sequence are the DSP Effects and Driver setting. Selections are made using the - - button and volume control knob. After the TONE LIN option is accessed, a further press of the Tone button will access the following scroll menu:
 Speed volume (GAL)
 TP Min - Sets Traffic announcement sound level
 PTY - Program Type Data. Can be set to Auto or Off
 RESET - Resets this menu to the original settings
Adjustment of each option is via the volume control knob or - - button.

RDS
RDS is a transmit and receive system that operates in the FM waveband. The data service provides information that is broadcast inaudibly alongside the audio signal. The station name will be displayed when the RDS system is active and tuned to a broadcasting station. If the reception quality of the tuned station deteriorates and no alternative frequency is available the tuner will start to search. If the tuner cannot find a transmitter for the same program that offers adequate reception quality, the tuner will revert to the last frequency received.
The RDS on/off mode can be user selected. To select the RDS function the left button marked - - should be depressed. The main display will show 'RDS ON' for 3 seconds. To cancel the RDS function the same button should be depressed again. The main display will show 'RDS OFF' for 3 seconds.

Mode
The Mode button allows the user to switch between the different listening modes, ie: Tuner, Tape, CD, or CDC. Each change is accompanied by a short mute pause during which the mode selection will change on the display. When switching between modes the settings previously set are retained for each individual mode.