HPE Aruba 2530-8G PoE+

Aruba 2530-8G-PoE+ Switch (J9774A)


System Specifications
Description
I/O ports and slots

• 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 type 10BASE-T, IEEE 802.3u type 100BASE-TX, IEEE 802.3ab type 1000BASE-T, IEEE 802.3at PoE+)
• Media type: Auto-MDIX
• Duplex: 10BASE-T/100BASE-TX: Half or full
• 1000BASE-T: Full only
• 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 type 10Base-T; IEEE 802.3u type 100Base-Tx; IEEE 802.3ab 1000Base-T GbE) or as a SFP slot (For use with SFP transceivers)

Additional ports and slots
1 Dual-Personality (RJ-45 or USB Micro-B) serial console port
Memory and processor

• ARM9E @ 800 MHz, 128MB flash
• Packet buffer size: 1.5MB dynamically allocated, 256MB DDR3 DIMM

Mounting and enclosure

• Mounts in an EIA-Standard 19-inch telco rack or equipment cabinet (Rack-Mounting kit available)
• Horizontal surface mounting
• Wall mounting

Management

• IMC
• CLI
• Web browser
• Configuration menu
• Out-of-Band management (Serial RS-232C or Micro-USB)
• IEEE 802.3 Ethernet MIB
• Repeater MIB
• Ethernet interface MIB

Performance (IPv6 Ready Certified)
Description
1000Mb latency
< 2.6 µs (LIFO 64-byte packets)
100Mb latency
< 7.4µs (LIFO 64-byte packets)
Throughput
Up to 14.8 million p/s (64-byte packets)
Switching capacity
20 Gb/s
MAC address table size
16000 entries
Physical Specifications
Description
Dimensions (H x W x D)

• 4.45 x 25.4 x 15.95 cm (1.75 x 10.00 x 6.28 in)
• 1U height

Weight
1 kg (2.2 lb)
Electrical Specifications
Description
Maximum heat dissipation
65 BTU/hr (68.58 kJ/hr), (Switch only: 65 BTU/hr; combined switch + maximum PoE devices: 293 BTU/hr)
Voltage
100 - 127 / 200 - 240 V ac
Current
1.4 A
Idle power1
13.4 W
Maximum power rating2
86 W
PoE power
67 W
Frequency
50/60 Hz