24 channel DMX source controller

Gloednieuw in doos met instruction manual. Misschien een paar krasjes door opslag.

Voor professioneel gebruik.

Bij voorkeur ophalen. Anders aangetekende verzending.

Afbeelding is een stockfoto. Bij serieuze interesse kan ik er foto's van maken.
------------------------------------------------------------------
Overview the ilight 24 channel dmx source controller is designed to provide control of any dmx512 controllable device. This product is of particular use for controlling dmx led colour changing units and entertainment devices. Each channel can be assigned a dmx channel from within icansoft. The scd24 can be controlled like any other ilight source controller using any of the ilight user interfaces to activate scenes and sequences. Key features • 24 channel dmx source controller module • 128 scene memory • suitable for 5 amp single phase supply • ilight ican network inputs • configuration stored in non volatile eeprom • firmware storage in reflashable flash memory over ican network • ce compliant to all relevant standards lighting systems ilight source controllers mechanical weight: 2.5Kg uk version - mains cable access: 2 x 25mm and 2 x pg16 knockouts control cable access: 1 x 25mm and 1 x pg16 knockout climate range: temperature: +2ºc to +40ºc humidity: +5 to 95% non condensing control inputs: two sets of terminals for the icannettm network suitable for belden 1502 one rj12 socket for programming the icannettm network one set of terminals for the dmx output electrical supply: 230 volts -/+ 10% 50/60 hz 1 amp (optionally, 127 volt 60 hz) protection: requires external circuit breaker load types: dmx controlled loads terminal sizes: incoming supply, max’ cable size: 4mm2 icannettm network cable size: 5 x 1mm2 dmx output: 2 x 1mm2 memory: flash memory to be able to upgrade software eeprom for 128 scene memory dimensions fade times: 0.1 Seconds to 60 minutes typical schematic icannettm (cat5-ftp)