Blackmagic Hyperdeck Studio HD PRO

I am selling my Blackmagic Hyperdeck Studio HD PRO after closing my podcast studio. Works as new, has only been in one rack, comes with power cables.
• For recording and playback of H.264 files up to 1080p/60 and ProRes or DNxHD files in SD/HD format up to 2160p/30 on SD/UHS-II cards or external USB drives
• Offers all the features of the Plus model and, in addition to the two SD card slots of the smaller models, has two SSD slots
• 6G-SDI inputs and outputs
• HDMI input and output
• Dual SD card slots allow cards to be swapped while recording
• Integrated clock and timecode generators
• High-quality front panel controls
• Works as a webcam when connected to a computer via USB port
• Can be used with any video software
• 1 SDI video input
• 2 SDI video outputs
• 1 SDI monitor output
• SDI speeds: 270 Mbit, 1.5 G, 3 G, 6 G
• 1 HDMI 2.0 video input
• 1 HDMI 2.0 video output
• Timecode connections: 1 XLR input, 1 XLR output
• Reference connections: 1 BNC input, 1 BNC output
• Tri-Sync or Black Burst
• SDI audio inputs and outputs: 16 integrated audio channels
• HDMI Audio Outputs: 8 Integrated Audio Channels
• Remote control: 1 RS-422 input, 1 RS-422 output
• Computer interface: 1 USB-C 3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates
• Video sampling rate: 4:2:2 YUV
• Color accuracy: 10 bit
• Color spaces: Rec. 601, Rec. 709, Rec. 2020.
• 33-Point 3D LUTs can be applied to the SDI monitor output
• HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
• Multirate support: Auto detect SD, HD and 6G-SDI
• Media: 2x 2.5" disk slots, 2x SD card slots
• 1 USB-C 3.0 expansion port for external recording in SD, HD, 2K DCI, Ultra HD and 4K DCI
• Media types: SATA-II or SATA-III 2.5-inch solid-state media carriers UHS-I and UHS-II SD cards
• Storage Media Format: Formats media into ExFAT (Windows/Mac) or HFS+ (Mac) file systems
• Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime in all formats up to 2160p/30 playback only in ProRes 4444 QuickTime up to 1080p/60
• Automatic distribution of fill-and-key signals to SDI outputs A and B DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF in 720p and 1080p HD formats up to 60 fps DNxHR HQX, DNxHR HQX MXF, DNxHR SQ, DNxHR SQ MXF, DNxHR LB, DNxHR LB MXF in 2K DCI and 2160p formats up to 30 fps H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit, H.264 Low 4:2:0 8 bit in all progressive formats up to 1080p/60
• Integrated 16-key control panel
• Seek controller with electronic coupling and 2.2" color display for transport and device control
• External Control: RS-422 deck control, SDI start/stop, timecode run
• The included Blackmagic HyperDeck Ethernet protocol supports remote file upload via FTP
• Software included: Blackmagic OS, Blackmagic HyperDeck Setup
• Product software upgrades are loaded at boot or with Blackmagic HyperDeck Setup via the USB port
• Compatible Operating Systems: Mac Catalina 10.15, Mac Big Sur 11.1 or later, Windows 10, 64 bit
• 1 Integrated AC power supply for 100-240 V, 50/60 Hz
• 1 Four-pin XLR connector for external 12V DC power supply or to charge the battery (power cable not included)
• Dimensions: 482 x 236.4 x 44.2 mm (1 height unit)
• Weight: 2.11 kg