Deze kwam ik nog tegen.
Geen idee of er een code opzit.

As originally fitted to the :

Volkswagen Lupo
Volkswagen Polo

Please note that code entry is only possible with the ignition switched on, and in the order shown. If the display continually shows "SAFE" and a number then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

Removal of the radio is fairly straightforward. The removal tools are inserted into the two vertical slots at the side of the fascia until a click is felt. The radio can then be withdrawn and the leads unplugged.




Code Entry as Follows:

Switch ON the Ignition (No need to start car)
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This may take up to 10 Seconds - be patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " >> " To Enter