Ka 8 4.50 mtr. Vliegklaar Mks HV servo.s Vliegklaar !
€ 750,00
Ophalen
Thuisbezorgd door Brenger vanaf € 42,-
1435sinds 12 mei. '25, 10:20
Kenmerken
ConditieNieuw
Type motorElektro
EigenschappenRTF (Ready to Fly)
Beschrijving
Ka 8 4.50 mtr. Vliegklaar Mks HV servo.s
A 50 motor met 80 amp esc .
Incl. Stoorkleppen in de vleugels.
Romp is in 2 delen en vleugels in 4 delen.
incl. 2 6s lipo sls 5000 als nieuw
eenvoudige vleugel hoezen
En nieuwe startwagen van Robbe
Van 1300 euro nu 750 euro VASTE PRIJS !!
Alleen zelf je ontvanger plaatsen. !!
The K8 from Schleicher is a single-seater glider from the 1950s, which is mainly used as a training aircraft for beginners due to its robust construction. This faithful replica from Phoenix - with an impressive wingspan of 4.50m - is manufactured using the latest laser-cut technologies as a light and high-strength wooden construction, which impresses with its enormous attention to detail.
Enormously high degree of prefabrication
The model is made of extremely light and high-strength, laser-cut balsa wood. The construction impresses with its enormous degree of prefabrication, which means that the construction work is reduced almost to the installation of the drive and electronics. The model is prepared for spoilers and is also completely and faithfully covered with iron-on film.
Numerous scale details
The KA8B from Phoenix Model has numerous scale details ex works. Many beautiful detailed solutions make the model look like the original. But it's not just on the ground that the model is so similar to its original - the KA8B also has an impressively true-to-scale flight pattern in the air.
Designed for electric propulsion
The 4.50m model is designed for electric propulsion, which efficiently pulls the model into thermals.
Features
Extremely light and high-strength, laser-cut wooden construction
Two-part wings
Two-part fuselage
Prepared for electric propulsion
Including all linkages and small parts
Detailed cockpit
Removable canopy
95% prefabrication, fully covered and painted
Technical data:
Span: 4500 mm
Length: 2105 mm
Weight: 7000g
Ailerons: 2x MKS Servos
Elevator: 1x MKS Servo
Rudder: 1x MKS Servo
Stoorkleppen 2x
Brushless motor: D-Power AL 50-04
Brushless motor set: D-Power Brushless Set AL50-04 & 80A Comet Regler
2 x Battery 5000mAh 6S 22,2V Lipo
Vleugelhoezen bubbeltjes folie
A 50 motor met 80 amp esc .
Incl. Stoorkleppen in de vleugels.
Romp is in 2 delen en vleugels in 4 delen.
incl. 2 6s lipo sls 5000 als nieuw
eenvoudige vleugel hoezen
En nieuwe startwagen van Robbe
Van 1300 euro nu 750 euro VASTE PRIJS !!
Alleen zelf je ontvanger plaatsen. !!
The K8 from Schleicher is a single-seater glider from the 1950s, which is mainly used as a training aircraft for beginners due to its robust construction. This faithful replica from Phoenix - with an impressive wingspan of 4.50m - is manufactured using the latest laser-cut technologies as a light and high-strength wooden construction, which impresses with its enormous attention to detail.
Enormously high degree of prefabrication
The model is made of extremely light and high-strength, laser-cut balsa wood. The construction impresses with its enormous degree of prefabrication, which means that the construction work is reduced almost to the installation of the drive and electronics. The model is prepared for spoilers and is also completely and faithfully covered with iron-on film.
Numerous scale details
The KA8B from Phoenix Model has numerous scale details ex works. Many beautiful detailed solutions make the model look like the original. But it's not just on the ground that the model is so similar to its original - the KA8B also has an impressively true-to-scale flight pattern in the air.
Designed for electric propulsion
The 4.50m model is designed for electric propulsion, which efficiently pulls the model into thermals.
Features
Extremely light and high-strength, laser-cut wooden construction
Two-part wings
Two-part fuselage
Prepared for electric propulsion
Including all linkages and small parts
Detailed cockpit
Removable canopy
95% prefabrication, fully covered and painted
Technical data:
Span: 4500 mm
Length: 2105 mm
Weight: 7000g
Ailerons: 2x MKS Servos
Elevator: 1x MKS Servo
Rudder: 1x MKS Servo
Stoorkleppen 2x
Brushless motor: D-Power AL 50-04
Brushless motor set: D-Power Brushless Set AL50-04 & 80A Comet Regler
2 x Battery 5000mAh 6S 22,2V Lipo
Vleugelhoezen bubbeltjes folie
Advertentienummer: m2267321745
Populaire zoektermen
modelbouw vliegtuigenRadiografisch & Vliegtuigen in Hobby en Vrije tijdmodelbouwradiografisch vliegtuig benzine in Radiografisch & Vliegtuigenrc vliegtuigen in Radiografisch & Vliegtuigenmodelbouw vrachtwagens radiografischverlinden modelbouwbenzine in Radiografisch & Auto'src auto benzine in Radiografisch & Auto'srevell modelbouwtekno in 1:50wsi in 1:50servowebra in Radiografisch & Vliegtuigenbamboe in Tuin en Terraspaarse eetkamerstoelencederhouten schoenspannerptt 55 in Nederlandbankierslamp glastanagra maison violet16 inch velg vw polo in Banden en Velgente huur ronde in te huur ronseboss effecten in Effectenelvis vhs