Iradio UV-98 PLUS SW HF VHF UHF CB 10W + USB prog.

Nieuwe Iradio UV-98 PLUS
met CB 70cm 2m tx en 18-64MHz TX 
inclusief USB prog kabel .
CB:27Mhz RX/TX
FM:64-108MHZ RX
AM/USB/LSB/CW reception
SW:2.3-30MHz RX
MW:520-1710KHz RX
LW:153-279KHz RX
18-64MHz TX/RX
136-520MHZ TX/RX
RX:(AM/FM/SSB)
18-620MHz
840-999MHz

inlusief alle toebehoren
nieuw
1 jaar garantie service
levertijd 7 dagen ongeveer
verzending met tracking
prijs incl verzendkosten


1024 channelsand three VFO channels

Triple frequency standby function

Cross Band Repeater

Triple PTT transmission

S9+field strength indicator, real-time display of field strength values

One-click frequency measurement and remote sub-tone scan

Customizable keyboard and side key functions.

Two emission end tones and MDC end tones

Manually editable device name (device name Can be used as call sign, MDC transmission and decoding)

Manually editable channel names in both Chinese and English

11 NOAA weather forecast channels (available only in the United States)

Receives aviation AM signals, frequency range 108-136MHz

Power-saving mode, gradually deepens power saving ratio over time when enabled

Frequency scan and channel scan functions

Spectrum scanning function

VOX function(Voice Activated Transmit)

Monitoring function

Emergency alarm function.

Editable single-tone transmission(The 1750 Hz tone can wake up the repeater.)

Customize the startup logo and prompt.

DTMF encoding transmission

DTMF remote dizziness and remote death wake-up

Type-C charging function,Base+Type-C Two charging methods.


👆 You can switch the frequency range according to your usage needs. The working range of the frequency band is: 18-64MHz, 64-642MHz, 840-1000MHz. These three ranges cannot work simultaneously, and an antenna compatible with this frequency range needs to be replaced before use. 18-64MHz requires replacement with an antenna compatible with this frequency range!!!! For example, the CB antenna (27MHz antenna) needs to be replaced for 27MHz, or the antenna compatible with 50MHz needs to be replaced for 50MHz!!!
👆 This walkie talkie requires a dedicated Type-C interface Programming Cable provided by the manufacturer to be connected to a computer, and channel programming is performed using UV-98 PLUS frequency writing software. A regular mobile phone data cable or regular write frequency cable cannot establish a communication connection.