HP 282905-001 n1200 Storage Router (2xLVD/SE SCSI, 1xFC, 1xLAN) met minimaal 2 jaar garantie

Wordt bulk geleverd zonder rackmountbeugels.

The HP StorageWorks Network Storage Router provides bidirectional connectivity in either a Fibre Channel Switched Fabric or a Fibre Channel Arbitrated Loop environment, supporting Fibre Channel and SCSI devices.

The router translates the Fibre Channel Protocol (FCP) to and from the SCSI Protocol. It transfers commands, data, and status information to and from Fibre Channel controllers and SCSI devices.

• Option Part Number: 280823-B21
• Spare Part Number: 282905-001 Chassis w/Board
• Supported devices include:
• Initiator Devices . Fibre Channel and SCSI hosts
• Direct Access Devices . RAID Controllers, disk drives, JBODs
• Sequential Access Devices . Tape drives
• Changer Devices . Tape and Magneto-Optical Libraries

• Ports:
• 1 Serial port, 6 pin RJ-11, RS-232
• 1 Fibre Channel
• 2 LVD SCSI ports (VHDCI connects)
• One 10/100 TX Ethernet port, RJ-45
• Drives Per SCSI Port: Up to two SDLT tape drives and four AIT or DLT (The robot arm counts as a SCSI device but does not need its own SCSI Port connection because of the low bandwidth requirement)
• Topology: Switched Fabric
• Protocols: FCP (Ultra2), PLDA

Ruim 4500 klanten geven ons een schitterende 9.8 als rapportcijfer (4.9 uit 5 sterren). Je krijgt van ons altijd minimaal twee jaar garantie (ook op refurbished).