FETTEC Flight Controller & Electric Speed Controller

Bij deze verkoop ik mijn FETTEC FC & ESC. Met de reden dat ik niet bekend ben met de firmware & software die hier op loopt. Zowel de FC & ESC verkeren in goede staat.

FETtec FC G4 v1.7 Flight Controller
Features:

• Latest STM32G473 Processor
• 180Mhz + Math accelerator
• Gyro IIM-42652 SPI

• Supply voltage 6-27V (2S-6S Lipo)
• 2x dedicated onboard BEC (2A each)
• 5V BEC for RX
• 5V/16V BEC for VTX (switchable and real Pit*)

• Improved IO protection
• All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes

• 2x 8 pin connector for solder free ESC connection
• Connector 1: ESC signal 1-4, telemetry, VCC, GND
• Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

• 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
• real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

• 2x 6 pin connectors for serials
• RX1, TX1, 3.3V, VCC, 5V, GND
• RX3, VCS/TX3, RGB LED, VCC, 5V, GND

• 1x 4 pin connector for receiver
• Signal, TLM, 5V, GND

• 5 UART serials
• UART 1 free
• UART 2 used for Receiver
• UART 3 free
• UART 4 used for onboard OSD, can be set free
• UART 5 used for ESCs / TLM / Onewire

• 4 ESC solder pads (Signal/GND) in each corner
• Buzzer pads
• 4 tiny RGB LEDs (selectable color)
• Supported ESC protocols
• PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

• FETtec Alpha FC firmware (KISS FC firmware flashable)
• Updated onboard OSD
• Graphic OSD (STM32)
• Full KISS Tuning

• Filter (PIDs, Rates, Settings)
• LED control (RGB LED, Racewire)
• VTX
• Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
• KISS GPS support + live map
• Custom graphic pilot logo
• Stick overlay
• Custom layout
• can be deactivated for usage of digital systems

• Connector type: JST-SH-1mm

FETtec 45A 3-6S 4-in-1 ESC - 30x30
Specifications

• Active current limiting @ 45A
• Input voltage: 3S-6S
• High-quality 40V MOSFETs
• STM32G071 @ 64MHz
• 128 kHz Motor PWM
• Full sine wave control
• Soldering holes for up to 5 additional capacitors
• KISS FC Passthrough
• Betaflight Passthrough (available in 4.1)
• Automatic input signal detection:
• Dshot 300-2400
• PWM
• OneShot 42/125
• OneWire BUS with up to 8kHz loop time (one cable for all Motorsignals and Telemetry)
• In development: Crossfire, SBUS

• 38 mm x 38 mm
• Mounting hole: 30.5 mm x 30.5 mm, M3 expandable to M4