Parasound ZM1250 12 channel

Mooie 12 kanaals versterker van Parasound te koop. Vollop opties voor automatisering en geweldig geluid. Hoge qualiteit versterker. Heeft de multichannel audio of the year award gewonnen in 2015. Relatief jong model dus. Gaat nog lange tijd mee.

Is op te sturen of af te halen. Indien je wilt testen geen probleem.

Heb twee stuks te koop staan. Tweede heeft geen voetjes er onder meer, ben ik kwijt geraakt.

Specificaties van fabrikant:
Vintage ZM1250Features

Our new ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels.

Universal amplifier for applications from 50 to 200 watts

24 speaker connections (A and B outputs for all 12 channels)

High current for stable operation at 2 Ohms

Channel pairs are bridgeable for up to 200 watts @ 4 Ohms

Class AB input stage plus premium Class D power stage

Independent audio sensing triggers, one for each zone

6 Independent 12 volt trigger inputs, one for each zone

Looping 12 volt trigger outputs for each zone

Master 12 volt trigger input to turn all zones on-off

Speaker level input for expanding systems w/out pre out jacks

Two bus inputs can be routed to any zone

Bus loop output jacks for passing audio to another amp

Mono mode combines L and R for single speaker applications

Separate level controls for all twelve channels

Detachable speaker connectors accept up to 12 gauge wire

Short circuit and overheat protection with front panel indicators

0.5 watt standby power consumption meets Energy Star & EU specs

Compact 2U chassis


Specifications
Power Output
RMS, All Channels Driven (20 Hz - 20 kHz)
50 watts x 12 @ 8Ω
90 watts x 12 @ 4Ω or 2Ω
160 watts x 6 @ 8Ω (Bridged)
200 watts x 6 @ 4Ω (Bridged)
Frequency Response
10 Hz - 60 kHz, +0/-3 dB
Total Harmonic Distortion
< 0.05% at typical listening levels
< 1.0% at full power
Interchannel Crosstalk
70 dB at 20 kHz
Input Sensitivity:
700mv = Full output (50 Watts @ 8 Ω)
Total Gain = 29 dB (Level controls set to Maximum)
S/N Ratio
> 112 dB, input shorted, IHF A-weighted
DC Trigger Requirements
+9 Vdc to +12 Vdc, 2 mA
Audio Trigger Requirements
2 mV Audio Signal
AC Power Requirement:
1500 Watts Maximum
100 Watts Typical
38 Watts Idle (All Zones on)
12 Watts Idle (One Zone on)
0.5 Watts Standby
110-130 VAC 60 Hz or 220-255 VAC 50 Hz
Note: AC mains voltage is set only by qualified electronics technician.
Dimensions:
Width: 17.25" (437 mm)
Depth: 14.5" (369 mm)
Height, with feet: 4.25" (108 mm)
Height, without feet: 3.5" (89 mm)
Weight:
Net: 17 lbs (7.7kg)
Shipping: 23 lbs (10.4kg)

Support and Downloads
ZM1250 Manual

Reviews
Sound + Image (Australia) 2015 Awards
Multichannel Amplifier of the Year
Consumer Electronics Show 2015 Innovations Award
Sound+Image (Australia - July, 2015)
"Let's be bold here and propose something - you can never have too many amplifiers! Even if your principal system is an astonishingly high quality audiophile set-up, what about the rest of the house? Or what about the 11 channels required for a full (or 7.1.4 at least) Dolby Atmos system? ... With stereo music the amp surprised us: the music was delivered with a combined honey-like smoothness and precision of truly high-quality amplifiers... the dynamic lift with the entry of the band into the song was completely unlimited... We ran several of our favourite Atmos-ey scenes from 'The Hunger Games - Catching Fire Part 1', with impressive dynamic impact and precision in the hemispherical imaging provided by this disc…It's hard to think how a power amplifier could be any more versatile than the Parasound ZoneMaster Model 1250. But that's not the end of it, because this isn't merely a workhorse; it's also an audiophile-quality product in its own right."