Apart MA120 - 100v pro mixing amplifier

Apart MA120
Professional mixing amplifier

• Mint condition
• Rack-mount 19”
• incl. 230V netsnoer
• nieuwprijs €650

(Veel ervaring met verzending audio-apparatuur per pakketpost)

• Het hart van deze allrounder wordt gedreven door een Class D Hypex UcD-module
• Geschikt voor 70v en 100v-systemen, alsook conventionele speakers (min. 4Ω)

--

Apart MA120 is a professional mixing amplifier that delivers 120W at 70 or 100V and comes equipped with 3 mic/line and 4 stereo line inputs.
This wonderful mixer with amplification from Apart has dimensions suitable for 19" rack mounting and offers a very simple and intuitive interface, both on the front panel and the rear panel indicating the connections.

The MA120's design is a true redefinition of mixing amplifiers, paring down to the most important controls. Anyone can figure out how to set it up and operate it.

Specifications:

Width: 19" - 483 mm
Depth: 290 mm
Power supply: 100 - 240 VAC
Putere RMS @ 4 ohms: 120W
Phantom power: 2
Zone output: 1
Tone Control: yes
VOX mute: 1
Emergency input: 1
Priority level: 4
Frequency response: 60 - 20 k
Balanced microphone input: 3
Priority level: 4
Input line: 4
Consum max.: 160W
Convection cooling
Class D amplifier
Weight: 5 KG

INPUTS
Number of Inputs
Emergency (line level with contact): 1
Paging Mic (mic level with contact): 1
Mic/Line (balanced): 2
Stereo Line (unbalanced): 4
Input Priority Levels: 4
Priority Input Contact: Yes
Chime: Yes
Tone Control: Yes
Wall Panel Controls: Yes
VOX Mute: Yes
Music Level Control: Yes

Front Panel Indicators: Signal present, clipping,
overload condition,
emergency mode active,
paging active, VOX active

Emergency Input
Nominal Input Sensitivity: 0 dBV (1 Vrms)
THD+N (Pre-Out, @ -6dB): < 0.5%
Frequency Response (-3dB): 45 Hz – 20 kHz
Input Impedance: 5 kΩ

Paging Mic
Nominal Input Sensitivity (Bal. Mic): -45 dBV (5.6 mVrms)
THD+N (Pre-Out, @ -6dB): < 0.4%

Frequency Response (-3dB):
Balanced Mic: 165 Hz – 20 kHz
Unbalanced, Balanced Line: 20 Hz – 20 kHz
Gain: -15 to +15 dB
Chime Length: 2 sec
Input Impedance: 2 kΩ
Mic A, B

Nominal Input Sensitivity:
Balanced Mic: -45 dBV (5.6 mVrms)
Balanced Line: -12 dBV (250 mVrms)
Unbalanced Line: -12 dBV (250 mVrms)

THD+N (Pre-Out, @ -6dB): < 0.2%

Frequency Response (-3dB):
Balanced Mic: 165 Hz – 20 kHz
Unbalanced, Balanced Line: 20 Hz – 20 kHz
Phantom Power (balanced only): +48VDC (7mA/input)
VOX Attenuation (Mic A, B, Inputs 1-4): 30 dB
Input Impedance: 2 kΩ

Inputs 1-4
Nominal Input Sensitivity (Unbal. Line): -12 dBV (250 mVrms)
THD+N (Pre-Out, @ -6dB): < 0.1%
Frequency Response (-3dB): 20 Hz – 20 kHz
Input Impedance: 10 kΩ

OUTPUTS
Number of Output Channels: 1
Output Connectors: 4-pin, 0.3 inch (7.6 mm) Euroblock
70V/100V Mode: Yes
Low Impedance Mode: Yes
Priority Output Contact: Yes
Minimum Operational Load: 4Ω

Amplifier
Topology: Class D
RMS Output Power (1% THD): 120 W
Dynamic Power: 150 W
SNR (1% THD): > 90 dB
THD+N (@ -6dB): < 0.5%
Protection: Temperature, overcurrent,
overvoltage, undervoltage

Priority Output
Voltage: 24V
Max Current: 0.5A
Pre-Out
Nominal Output Level: 0 dBV

Standby
Wakeup Sensitivity:
Inputs 1-4: -43 dBV (6 mVrms ± 10%)
Mic A, B (RCA): -50 dBV (5 mVrms ± 10%)
Mic A, B (Balanced, VOX off): -74 dBV (0.3 mVrms ± 10%)
Time to Auto Standby: 10 min

Power Consumption (100-240VAC 50/60Hz)
Normal Operation: 160W
Idle Operation: 12.5W
Standby Mode: 0.5W
Cooling: Convection

Overall Dimensions
Height (without feet): 3.5 inches (89 mm)
Width: 19 inches (483 mm)
Depth: 11.8 inches (300 mm)
Weight: 11.0 lbs (5.0 kg)