Intelligente temperatuur | vochtsensor, PoM voeding

€ 67,58

50sinds 30 dec. '24, 13:09

Kenmerken

ConditieNieuw

Beschrijving

This version of the intelligent multifunctional room sensor measures temperature, humidity and ambient light. It has an RJ45 connector over which both data and power are distributed. But because there is no digital-to-analog (D/A) conversion, it does not have the classic terminal blocks. And therefore also no analog output signal. This makes it a good buy. With the right firmware, it can be combined with Modbus fans or with a frequency converter, which in turn controls the speed of your AC fan. But this -M version of the RCTH is also the ideal choice as a building block of a Sentera PoM network.

Temperature and humidity measurement in 1 sensor
The most important comfort parameters for a pleasant feeling indoors are temperature and humidity. With this sensor, both parameters are measured and a single control signal is calculated based on both measured values. POM nutritionThis sensor is available in different versions depending on the required power supply. The power supply and data of this version are via an RJ45 connection. There is no analogue output. This makes this sensor easy to connect and inexpensive to purchase. Ideal as part of a network.

Smart construction

The RCxxx series are suitable for surface mounting. But in a smart way. The mounting is designed in such a way that it fits perfectly over a standard 68 mm flush-mounting box. And the cable passage is at the back, so you can work perfectly with flush-mounted pipes. Flush-mounted or surface-mounted
You don't have to choose. The sensors from the Fxxx series are all suitable for both flush-mounted and surface-mounted installation .Everything in proportion
You determine the proportions between the different measured values. By this we mean that you determine whether and to what extent the different measured values weigh in the final result. In this instructional video you can see how this works. You can also switch them off. So if you want, for example, only the humidity measurement to be taken into account, but not the temperature, then that is perfectly possible.